High Quality ISO CE Approved 0.5Ton ~ 10 Ton Cantilever Swing Arm Jib Crane With Reasonable Price
Brief Introducion:
The BZ type crane is a small and medium-speed lifting equipment developed recently .
It has characteristics of unique structure , safe and reliable operation , high , efficiency , energy-saving , effort-saving , and flexibility . It can be operated under three dimensional environment . It is superior in the cases of short distance , concentrated lifting . It is widely used at various sites for various trades .
It can be operated under three-dimensional environment. Compared to other lifting device, it is superior especially in the case of short-distance and concentrated lifting.
It is widely used in workshop, warehouse, wharf etc.
Technical Parameters:
| Type | BZ0.25 | BZ0.5 | BZ1 | BZ2 | BZ3 | BZ5 | BZ8 | BZ10 |
| Lift Capacity (t) | 0.25 | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 |
| Max. Lift Height(m) | 3 | 3 | 3 | 3 | 4 | 4 | 6 | 8 |
| Slew Angle(0) | 360 | 360 | 360 | 360 | 360 | 360 | 360 | 360 |
| Lift Speed (m/min) | Normal | 4;10;8 | 5;10;8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Slow | 1;2.5;0.8 | 1.25;2.5 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| Level Travel Speed (m/min) | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Slewing Speed (r/min) | 0.7 | 0.7 | 0.7 | 0.7 | 0.6 | 0.6 | 0.6 | 0.6 |
| Lift mechanism | wire rope electric hoist or chain electric hoist |
| Power supply | 380-420V/3phase/50hz or customized |
| Control mode | Pendent push button control or remote control |
| Above parameter just for your reference,jib crane can be customized design Max.20t according to your demands. |
Product Details Photo:
Safety Devices for gantry crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
MD Jib Crane Cases :
Company certificates:
MD Crane will do more than the certificates required to guarantee the quality of our cranes.
FAQ ABOUT MD CRANES:
1.Can the cranes be customized?
Yes,every customer’s working condition is different, all of our products can be customized depend on customers’ requirements. Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.
4.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
5.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
6.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.
Just send inquiry to us, we will do the rest for you!
|
|
High Quality ISO CE Approved 0.5Ton ~ 10 Ton Cantilever Swing Arm Jib Crane With Reasonable Price Images
|
